Katalog

Hydraulic Presses

		LLR 1000 A	LLR 2000
Rated forming force	kN	10000	20000
Effective stroke at nominal forming force	mm	3	5
Ram stroke	mm	140	150
Ram adjustment	mm	15	15
Shut height	mm	630	700
Width between uprights under guide ways	mm	900	1120
Ram working area	mm	710 x 650	850 x 850
Table working area	mm	900 x 1000	1100 x 1100
Number of ram strokes during continuous run	min^-1	36	32
Number of useful ram strokes	min^-1	20	18
Upper ejector-ejecting force	kN	100	100
Upper ejector-stroke	mm	30	30
Lower ejector-ejecting force	kN	200	200
Lower ejector-stroke	mm	60	30
Width	mm	2840	4000
Depth	mm	2380	3680
Height above floor	mm	3815	6730
Height of the press	mm	4115	7020
Total press weigh	kg	37000	109000
Input of the main electric motor	kW	37	75
Sucked air consumption "single stroke"	dm3/stroke	28	96
Total installed input	kW	39	80

		CTH 250	CTH 400	CTH 630	CTH 1000
Nominal force	kN	2500	4000	6300	10000
Return force	kN	300	590	960	1500
Stroke	mm	800	1000	1250	1600
Approach speed	mm.s-1	400	400	400	400
Working speed max.	mm.s-1	70	66	63	56
Working speed min.	mm.s-1	20	16	11	9
Reverse speed	mm.s-1	426	469	410	368
Shut height	mm	800	10000	1250	1250
Clamping surface of slide width x depth	mm	1000 x 1250	1250 x 1600	1600 x 2000	1600 x 2500
Blankholder force	kN	1000	1250	1600	2000
Blankholder stroke	mm	320	400	500	630
Upper ejector force	kN	100	160	200	250
Upper ejector stroke	mm	330	400	450	500
Clamping surface of table width x depth	mm	1000 x 1250	1250 x 1600	1600 x 2000	1600 x 2500
Main motor output	kW	55	75	75	95
Press (work. floor) plan width x depth	mm	3920 x 3000	4200 x 3400	4400 x 3600	4800 x 4000
Press height above floor	mm	5600	6500	7850	10200

		CDRA
Nominal pressing force	kN	5000
Stroke of press plunger	mm	700
Max. working speed	mm-s-1	05 to 3
Approach speed	mm.s-1	25
Return speed	mm.s-1	95
Support beam travelling speed	mm.s-1	30
Maximum lenght of wheel set	mm	2650
Gripping lenght of centring device	kN	30
Max. whell diameter (tread)	mm	1250
Max. diameter of wheel set	kg	3500
Main E-motor output	kW	15

1 2 3 4 ►

up ▲
Illustrations and specifications are not binding in detail. The design is subject to modifications and improvement without notice.