| | Metal Forming Machines| | | THA 14/32 S
THA 14/32 | THA 25/60 S-C
THA 25/60C | THA 31/80 S-C
THA 31/80 C | THA 40/120 S-C
THA 40/120 C | | Maximum output | | Number of nails manufactured | pcs.min-1 | 900 | 700 | 600 | 500 | | Material processed | | Maximum diameter of steel wire | mm | 1,4 | 2,5 | 3,15 | 4,0 (4,2 at 400 r.p.m) | | Maximum diameter of Al-alloy wire | mm | - | 4,0 | 5,0 | 6,0 | | Maximum diameter of wire | mm | 0,7 | 1,0 | 2,2 | 2,5 | | Wire nominal diameter tolerance | mm | ±0,03 | ±0,03 | ±0,04 | ±0,05 | | Products parameters | | Min. length of nail | mm | 6 | 10 | 10 | 10 | | Max. length of nail | mm | 35 | 63 | 80 | 120 | | Max. diameters of head* | mm | 3,5 | 6,0 | 8,0 | 10 | | Parameters of machines | | Maximum input | kW | | | Standard electrical equipment supplied | | 400 V/50 Hz, 3 phases (modifications to special order) | | Min. protection of supply leads for stand. el. equipment supplied | A | 20 | 25 | 80 | 80 | | Machine weight without accessories | kg | 570 | 930 | 1560 | 1620 | | Machine wight with accessories | kg | 668 | 950 | 1580 | 1640 | | Lubrication system | | Lubrication | | combined with time relay | electronic | electronic | electronic | | Optimal oil consumption | (1,8 h-1) | 0,05 | 0,1 | 0,1 | 0,1 | | Oil tank no. 1 | | approx. capacity | l | 11 | 16 | 16 | 16 | | approx. capacity | l | - | 3 | 3 | 3 | | *Maximum 2,5 times the diameter of the of the steel wire |
| | | P100/1 | P100/1A | P100/2 | P100/2A | | Power input | kW | 6,9 | 6,9 | 6,9 | 13,8 | | Dimensions : Length | mm | 1650 | 1650 | 2650 | 2650 | | Width | mm | 1290 | 1290 | 1290 | 1290 | | Height | mm | 2150 | 2150 | 2150 | 2150 | | Wight | kg | 1350 | 1370 | 1460 | 2400 | | Infinitely variable production capacity | | 0 - 400 / pcs.min-1 | | Electrical equipment - standard | | 3 x 380 ... 480 / V 50 (60) /Hz | | Voltage of control | | 24 / V | | Main drive * | | 5,5 / kW | | | | Feeding R90 / L90 (R - right, L - left) | | Infinitely variable length of feeding | | 0 - 100 / mm | | Repeatability of feeding accuracy | | ±0,005 / mm | | Reduced angle of feeding | | 90° on request 60° or 120° | | Independent drive | | 1,4 / kW | | *When using two modules (types P100/2 and P100/2A) it is possible with mechanical coupling to use just on drive. |
| | | NHM 3006 | NHM 3006-T | NHM 3010 | NHM 3010-T | NHM 3016-T | NHM 3020-T | NHM 3025-T | | Max. sheet thickness | mm | 6 | 6 | 10 | 10 | 16 | 20 | 25 | | Min. sheet thickness | mm | 0,6 | 0,6 | 1 | 1 | 1,6 | - | - | | Max. shearing length | mm | 3050 | 3050 | 3050 | 3050 | 3050 | 3050 | 3050 | | Cutting edge inclination angle | ° | 0,5-2,5 | 0,5-2,5 | 0,5-2,5 | 0,5-2,5 | 0,5-3 | 0,5-3 | 0,5-3 | | Gap/throat | mm | - | 350 | - | 350 | 350 | 500 | 500 | | Table working height | mm | 900 | 900 | 900 | 900 | 900 | 900 | 900 | | Back stop ressetting | mm | 5-1000 | 5-1000 | 5-1000 | 5-1000 | 10-1000 | 10-1000 | 10-1000 | | Number of strokes in constant operation | min-1 | 20 | 20 | 20 | 20 | 12 | 10 | 8 | | Electric motor power output | kW | 7,5 | 7,5 | 11 | 11 | 37 | - | - | | Total input required | kVA | 8,2 | 8,2 | 11,7 | 11,7 | 38 | 38 | 45 | | Dimensions of machine | | Length | mm | 4100 | 4100 | 4200 | 4200 | 4240 | 4250 | 4260 | | Width | mm | 2770 | 2770 | 2980 | 2880 | 2880 | 2900 | 2980 | | Height | mm | 2390 | 2390 | 2600 | 2600 | 2570 | 2700 | 3180 | | Wight of machine | kg | 7000 | 7150 | 8300 | 8500 | 16800 | 19500 | 24000 |
| | | OLH - CNC 30/1250
OLH 30/1250 | | Maximum force | kN | 300 | | Max. width of sheet metal to be bent | mm | 1250 | | Working width B1 | mm | 1300 | | Clearance between vertival supports | mm | 1010 | | Stroke | mm | 100 | | Width of table | mm | 100 | | Height of table | mm | 800 | | Fast operating movement speed | mm/sec. | 80 | | Fast return movement speed | mm/sec. | 50 | | Max. working speed | mm/sec. | 200-400 | | Width B | mm | 1500 | | Height V | mm | 2100 | | Depth H | mm | 1300 | | Motor power | kW | 3,0 | | Max. pressure | MPa | 230 | | Oil tank capacity | l | 60 | | Weight | kg | 2000 |
| |
