Katalog

Pressure Casting Machines

		TL 5-250	TL 5-400	TL 5-630/750	TL 5-750
Closing unit:
Nominal forming force	kN	2500	4000	6300	6300
Maximal closing force	kN	2800	4500	7500	7500
Stroke of die carrier	mm	450	600	700	700
Clamping plate dimensions	mm	840x840	990x990	1200x1200	1200x1200
Daylight between tie bars	mm	535x535	605x605	755x755	755x755
Die maximal height	mm	700	750	900	900
Die minimal height	mm	250	250	350	350
Hydraulic ejector force	kN	9-152	14-228	50-330	50-330
Ejector stroke	mm	120	130	160	160
Machine axis height	mm	1300	1400	1430	1430
Speed of machine closing/opening	mm/s	438	370	305	400
Pressing part:
Filling force	kN	100-245	125-310	280-610	320-720
Pressing piston stroke	mm	400	480	560	560
Diameters of filling units	mm	50-80	60-100	60-120	60-120
Maximal weight of filled Al alloy
- at 120 mm diameter of filling unit	kg	-	-	10,6	10,6
- at 110 mm diameter of filling unit	kg	-	-	8,9	8,9
- at 100 mm diameter of filling unit	kg	-	6,3	7,3	7,3
- at 90 mm diameter of filling unit	kg	-	5,1	6,0	6,0
- at 80 mm diameter of filling unit	kg	3,3	4,0	4,7	4,7
- at 70 mm diameter of filling unit	kg	2,6	3,1	3,6	3,6
- at 60 mm diameter of filling unit	kg	1,9	2,3	2,6	2,6
- at 50 mm diameter of filling unit	kg	1,3	-	-	-
Adjustability of pressing part under the machine axis	mm	0-200	0-200	0-250	0-250
Max. pressing speed	m/s	6	6	6	10
Operating data:
Total power input of machine	kW	25+6	33+6	58	67
Power input of pump motors	kW	22,5	30,5	45	55*)
Heating of working fluid	kW	6	6	9	9
Supply of control circuits
Heating circulation, filtration	kW	2,2	2,2	2,2	2,2
Maximal operating pressure of machine hydraulic system	MPa	16	16	16	16
Accumulator operation pressure	MPa	20	20	16	16
Machine weight	kg	10400	15500	26500	27000
- length	mm	5450	6550	7950	8300
- width	mm	1960	2300	2800	2800
- height	mmm	2500	2670	3200	3200

		CLH 100.01	CLH 160.01	CLH 250.01	CLH 400.03	CLH 630.02	CLH 1000.01	CLH 1600.01	CLH 2500.01
Locking force	kN	1000	1600	2500	4000	6300	10000	16000	25000
Die opening stroke	mm	350	350	450	350-600	350-700	450-800	660-1100	800-1200
Overall size of plates	mm	630x630	700x700	840x840	990x990	1200x1200	1560x1560	2000x2000	2300x2300
Die height (max/min)	mm	500/180	600/210	700/250	750/250	900/350	1150/500	1400/600	1600/800
Space between tie bars	mm	390x390	430x430	535x535	605x605	755x755	950x950	1300x1300	1400x1400
Tie bar diameter	mm	70	90	105	125	150	210	250	320
Hydraulic ejector force	kN	5,5-70,75	7,5-105	9-133,5	14-200	50-330	420	170-570	400-800
Ejector stroke	mm	80	100	120	130	150	200	250	350
Injection force	kN	42-128	48-200	74-320	90-390	146-657	210-910	350-1350	394-1613
Injection stroke	mm	300	350	400	470	520	750	850	1100
Filling chamber Ø (min/max)	mm	30/50	40/70	50/80	50/100	60/110	70/140	80/160	90/170
Max. shot volume Al (Zn)	kg	0,98	2,24	3,3	6,15	8,9	21,6	28,4	41,6
Dry cycle time	s	5,5	6	6,5	7	8,5	15	18	25
Input required	kW	11	15	18,5	22	37,5	67	55,5	132,5
Overall machine dimensions (lxwxh)	m	4,9x1,2x1,8	5,5x1,4x2,2	6,1x1,5x2,2	7x1,7x2,5	7,9x2,4x3	10x2,7x2,5	12x3,5x4,3	14,9x4x4
Weight of machine	kg	6000	6500	10400	16000	23000	46000	95000	175000

		CLT 100/10-A2	CLT 160.02	CLT 250.01	CLT 400/16-B2	CLTA 40.01	CLTA 63.01
Locking force	kN	1000	1600	2500	4000	400	630
Die opening stroke	mm	300	400	450	300-525	200	250
Overall size of plates	mm	630x630	700x700	840x840	990x990	450x450	520x520
Die height (max/min)	mm	500/200	600/210	700/250	750/300	350/120	400/160
Space between tie bars	mm	385x385	430x430	535x535	605x605	304x304	337x337
Tie bar diameter	mm	75	90	105	125	56	63
Hydraulic ejector force	kN	70	7,5-105	9-133,5	200	44	55
Ejector stroke	mm	80	100	120	130	60	70
Injection force	kN	50-98	50-110	86-172	86-172	28-50	33-63
Injection stroke	mm	175	175	230	230	130	130
Filling chamber Ø (min/max)	mm	60/80	60/80	70/100	70/100	45/55	50/65
Max. shot volume Al (Zn)	kg	3,5	4	8,5	8,5	1,2	1,7
Dry cycle time	s	5	5	6	7	3	3,15
Input required	kW	11	15,55	18,5	22	11	15
Overall machine dimensions (lxwxh)	m	3,9x1,2x2,3	4,7x1,7x2,8	5,3x1,5x2,6	5,9x1,8x2,6	3,4x1,4x1,9	3,8x1,4x2,3
Weight of machine	kg	6800	8100	10400	15150	4300	4600

		CLV 100.01	CLV 160.01	CLV 250.01	CLV 400.01
Locking force	kN	1000	1600	2500	4000
Die opening stroke	mm	350	350	450	350-600
Overall size of plates	mm	630x630	700x700	840x840	990x990
Die height (max/min)	mm	500/180	600/210	700/250	750/250
Space between tie bars	mm	390x390	430x430	535x535	605x605
Tie bar diameter	mm	70	90	105	125
Hydraulic ejector force	kN	5,5-70,75	7,5-105	9-133,5	14-200
Ejector stroke	mm	80	100	120	130
Injection force	kN	42-128	48-200	74-320	90-390
Injection stroke	mm	300	350	400	470
Filling chamber Ø (min/max)	mm	30/50	40/70	50/80	50/100
Max. shot volume Al (Zn)	kg	0,98	2,24	3,3	6,15
Dry cycle time	s	5,5	6	6,5	7
Input required	kW	11	15	18,5	22
Overall machine dimensions (lxwxh)	m	4,9x1,2x1,8	5,5x1,4x2,2	6,1x1,5x2,2	7x1,7x2,5
Weight of machine	kg	6000	6500	10400	16000

		VALUE
Nominal heating temperature	°C	1250 (1300)
Fumace working temperature max.	°C	1300 (1350)
Heating rate	°C/h	150
Aloowed hearth loading	kg/m2	to 10000

up ▲

Illustrations and specifications are not binding in detail. The design is subject to modifications and improvement without notice.