| | CONVENTIONAL KNEE - TYPE MACHINES | | | F 2V-L | FNG 32 | FGU 32 | FGV 32 | FNK2 (R) | | Size of table | mm | 300 x 1300 | 360 x 400 | 360 x 1400 | 360 x 1400 | 300 x 1300 | | Travels - longitudinal, cross, vertical | mm | 840, 376, 420 | 600, 400, 400 | 1000, 275, 420 | 1000, 300, 420 | 840, 376, 460 | | Taper in Spindle | ISO | 40 | 40 | 50 | 50 | 40 | | Spindle speeds number of steps range | RPM | 60-4000 | 50-4000 | 12/31.5-1400
12/45-2000 | 12/31.5-1400
12/45-200 | 60-4000 | | Output of main drive motor | kW | 2,2 (3) | 4 | 5,5 | 5,5 | 2,2 (3) | | Working feeds - no of rates | mm/min | stepless | stepless | stepless | stepless | stepless | | Longit. and cross/vertical | | 28-630/8-196 | 15-1000/6-400 | 20-900/5,7-250 | 20-900/5,7-250 | 28-630/8-196 | | Rapid traverse longit. and cross/vertical | mm/min | 1500/450 | 2000/800 | 1635/460 | 1635/460 | 1500/450 |
  Medium Size Milling Machines Manual & Stright Cut controlled | | | FGS 50 T (NCP) | FGS 63 T (NCP) | | Size of table | mm | 500 x 1600 | 630 x 1800 | | Travels - longitudinal, cross, vertical | mm | 1250, 500, 600 | 1400, 630, 600 | | Taper in Spindle | ISO | 50 (40) | 50 (40) | | Spindle speeds range | RPM | 0-3000 | 0-3000 | | Output of main drive motor | kW | 11 | 15 | | Working feeds - no of rates | | 18 | 18 | | Longit. and cross/vertical | mm/min | 10-2000 / 2,5-500 | 10-2000 / 2,5-500 | | Rapid traverse longit. and cross/vertical | mm/min | 4000 | 4000 |
 Small Size Milling Machines | | | FV 25 CNC A | FV 30 CNC | | Size of table | mm | 350 x 1300 | 305 x 1300 | | Travels - longitudinal, cross, vertical | mm | 760, 355, 152 | 760, 380, 152 | | Taper in Spindle | ISO | 40 | 40 | | Spindle speeds range | RPM | 50-6000 | 100-4000 (150-6000) | | Output of main drive motor | kW | 5,5 | 5,5 |
|
| | |
| |
