Katalog

Forging Equipment

		KHZ 2 - A	KHZ 4 - A	KHZ 8 - A
Rated energy	kJ	20	50	80
Minimum total height of dies	mm	250	350	400
Clear width	mm	400	500	600
Clamping surface in top holder	mm	286x440	300x570	342x670
Clamping surface in bottom holder	mm	268x440	300x570	342x670
Force of lower ejector	kN	50	80	150
Stroke of lower ejector	mm	30	40	35
Number of strokes at rated energy	min-1	20	18	18
Hydraulic oil operating pressure	MPa	16	16	16
Total input required	kVA	30	55	2x55
Niminal pressure of filled air	MPa	0,6	0,6	0,6
Weight of hammer complete	kg	18700	38200	65700
Weight of hammer inself	kg	16900	36200	53200
Weight of hydraulic power pack	kg	1800	2000	2500
Height of hammer above floor	mm	3075	3620	3945

		CKW 4000	CKW 6300	CKW 7000
Pressing force	MN	40	63	70
Working pressure	MPa	32	35	35
Upsetting force	MN	50	73	80
Working liquid pressure in the course of ramming	MPa	40	40	40
Return cylinders force	MN	8,9	13,7	13,7
Working stroke	mm	2500	2500	2800
Press height clearance	mm	5100	6100	6400
Passage between columns	mm	3000/1400	4200/2000	4200/2000
Max. eccentricity	mm	400	500	500
No. of press cylinders		3	3	3
Forging table stroke	mm	3400	6000	6000
Pressing speed	mm.s-1	70	63	63
Passing speed	mm.s-1	280	250	250
Speed of fast forging	min-1	80	60-85	60-85
Speed of table feed	mm.s-1	30/250	30/300	30/300
Speed of cross feed	mm.s-1	30/250	30/300	30/300
Speed of swage storage	mm.s-1	30*230	30/300	30/300
Height of press above floor level	mm	8700	10440	13500
Height of press undre floor level	mm	10100	12750	15750
Weight: press	t	640	1350	1435,8
table feed	t	107,5	170	173,5
cross feed	t	23	45	47
swage storage	t	45	73	80
Total weight (without covers around the press)	t	815,5	1638	1736

QKK

		CKW 630	CKW 1000	CKW 1600	CKW 2500	CKW 3200
Nominal forming force	MN	6,3	10	16	25	32
Reverse force	MN	1,1	1,9	2,8	4,8	5,0
Press stroke	mm	800	1000	1250	1600	1800
Max. permissible eccentricity	mm	140	180	200	250	280
Maximum opening	mm	1800	2250	2800	3600	4000
Pitch of cilumns	mm	2250	2800	3500	4500	5000
Number of olanishing strokes	min-1	95-115	90-110	80-100	70-90	60-80
Total installed input	kW	600	900	1200	2150	2600
Forging plate stroke	mm	±800	±100	±1250	±1600	±1800
Forging plate size	mm	2700x900	3200x150	4000x1400	5000x1800	5600x2000
Overall dimensions - length	mm	8620	10700	12700	15800	19800
Overall dimensions - width	mm	10070	11650	13500	16100	20500
Max height above the floor	mm	3065	3920	5340	6830	7450
Max. depth below the floor	mm	3830	4670	6340	8100	8150
Forming speed	mms-1	90	90	90	95	75

CKW

Illustrations and specifications are not binding in detail. The design is subject to modifications and improvement without notice.