SUPREMA - CNC thermal cutting machine can be used for oxy-fuel and plasma cutting, primarily in smaller or middle-sized companies.

Thermal cutting machine CNC – SUPREMA

SUPREMA – CNC thermal cutting machine can be used for oxy-fuel and plasma cutting, primarily in smaller or middle-sized companies. It is intended for a normal two-shift operation. Several oxy-fuel torches, with the possible manual bevelling process large metal sheets quickly and precisely. At the same time it eliminates downtime during operation and error rate. The SUPREMA machine guarantees maximum reliability, accuracy and excellent dynamics.

The portal from the thick-walled profile with steel reinforcements and welded supports, which are equipped with linear leads, forms a strong unit with accurate positioning. The leads are stored in the adjustable clamping plates, which enable accurate setting and provide high accuracy also for the long machine operation. The energy power supply is placed in the cable chain.

Machine rail

The machine rail is with standard columns and with tension rail. The columns are fixed to the floor with chemical anchors. The clamps, with which is the machine rail fixed to the floor, allows accurate rail setting and is possible to adjust it any time as it will be necessary. The machine rails are supporting frame for the racks.

Machine portal

This is the two-sided driven portal with supports. The motor-driven lifting device contains a protective micro-switch that prevents damaging contact between the burner and material.
Two-sided driven portal is a completely hard welded unit, which is moved on the ground rails by means of racks and pinions. On the top of the portal is double profiled linear leads and the track provides very accurate movement of the supports. This way of the placing is used by the laser machines also and thanks to this it is possible to reach smaller positioning accuracy then  0.3 mm. The system of the end and reference switches ensures exact keeping of the portal squareness and exact repeated positioning to the shapes after machine switch-off.
For the fixation of the power cable and gas hoses are used cable chains placed in the safety plate which prolongs theirs longer lifetime.

Standard equipment:

  • Two-sided drive of the portal
  • B&R control system
  • Flexible energy chains
  • Electric regulation of the height of burners
  • Transfer of flame-cutting data by means of USB, LAN network
  • Precise control of the height of the plasma torch
  • Pneumatic-electric setting of the ignition height of the plasma torch Standard

Optional equipment:

  • Laser sensor for setting of initial value of the position of the torch
  • CAD/CAM software for preparation of flame-cutting data
  • Electric ignition of the flame of the autogenous torch
  • IHT capacity control of the height of the autogenous torch

Warning: Invalid argument supplied for foreach() in /data/1/8/1843503e-8530-4c63-aea5-fd8894436569/ on line 98