MIRA

MIRA - CNC Cutting machine is distinguished by its simplicity. It is an ideal solution for smaller operations and companies starting with thermal cutting of materials.
Request

Cutting machine CNC MIRA

MIRA – CNC Cutting machine is distinguished by its simplicity. It is an ideal solution for smaller operations and companies starting with thermal cutting of materials. The construction of the machine is designed so that it could easily machine standard metal sheet formats. Besides this, the MIRA machine works perfectly with standard air plasma systems, because it is based on the concept of CNC gantry cutting machines designed for oxy-fuel and plasma cutting of materials. For cutting of thicker metal sheets, the machine is fitted with an oxy-fuel cutting unit. It may have installed an oxyfuel technology when there is a demand for cutting metal sheets of higher thickness.

Technical solution:

  • Double sided drive without clearance-free gearboxes
  • Two linear guiding on the machine portal
  • Linear guiding of the torch lift
  • Colour touch display
  • 10,4” touch panel with technological keyboard for easy control
  • Motors with constant torque moment – high quality cutouts
  • Thickness of cutt material 100 mm
  • Set of macros – simplification of operator work
  • USB connector – easy data transfer
  • Minimizing of unproductive time during operation
  • High-performance, operation-stable, user friendly CNC system

The machine can be delivered as part of the complete delivery of the burning workplace, i.e. including the plasma source and the consuming parts for plasma cutting, the compressor for the supply of air, including its treatment and filter equipment for the exhaustion of burnt gases originated during the thermal cutting of materials.

Standard equipment:

  • Double-sided portal drive
  • B&R control system
  • Flexible energy chain in axis X
  • Transfer of burning data via USB, LAN network
  • Precise control of the height of the plasma torch
  • Pneumatic-electric setting of the ignition height of the plasma torch

Optional equipment:

  • Laser sensor for setting the initial value of the position of the torch
  • CAD/CAM software for preparation of flame-cutting data
  • Electric ignition of the autogenous torch flame
  • IHT capacity control of the height of the autogenous torch

Warning: Invalid argument supplied for foreach() in /data/1/8/1843503e-8530-4c63-aea5-fd8894436569/strojimport.com/web/wp-content/themes/strojimport/single.php on line 98