VOM 50

VOM 50 -  is portable radial drilling machine which fully suits to the demands on quick preparations, working capacity, efficiency and accuracy regarding drilling operations on heavy and sizeable components, on machine frames and equipment, especially by their mounting.
Request

Portable radial drilling machine VOM 50

VOM 50 – is portable radial drilling machine which fully suits to the demands on quick preparations, working capacity, efficiency and accuracy regarding drilling operations on heavy and sizeable components, on machine frames and equipment, especially by their mounting. It is designed for drilling, reaming and tapping operations on components of large machine tools and forming machines, turbines, generators, compressors, different kinds of steel constructions, boilers, containers, chemical equipment, furnaces of cement works, shipbuilding etc. It is also used by engineering workshops, boiler makers, bridge builders, shipbuilding yards and heavy machine manufacturers.

Assemblies of the machine

  • Bed – casting is from the grey iron for slide adjusting
  • Bed slide – casting is from grey iron movable on bed leading
  • Column – casting is from the grey iron, which is screwed to the slide
  • Mantle – casting is from grey iron for vertical transfer of the arm
  • Bush – casting is from grey iron which is moving vertical on the column
  • Arm – casting is from the grey iron for horizontal movement in the bush
  • Drilling head – casting is from the grey iron skew between arms
  • Drilling slide – casting is from the grey iron with spiral gears
  • Elekrical equipment – operating voltage 400V/ 50Hz; control voltage 100 V; execution of eletrical equipment EN 60204-1
  • Accuracy of the machine – acceptance according ČSN ISO 2423 / eqivalent DN 8625 /

Standard equipment:

  • Electric equipment
  • Taper drill sockets Morse 5/4 und 5/3
  • Machine light
  • Drifting wedges
  • Oil can
  • Spot light
  • Key drifts
  • Machine transport suspensions
  • 2 pieces reducing bush

Accessories / options

  • Extended bed for increased slide movement of 2600 mm / extension module
  • Coolant device
  • Clamping cube Vb8
  • Top clamping area 1000 x 700 mm
  • Lateral clamping area 1000 x 500 mm
  • Tilting table Vc8
  • Top clamping area 750 x 600 mm
  • Lateral clamping area 750 x 550 mm
  • Frequency-controlled
    • main drive with expansion of the spindle speed range to 1600 1/min
    • infinitely variable slide adjustment; variable adjustment of the sliding sleeve; movement of the horizontal pivoted arm and tilting head; turning movement of the drilling head
  • Height adjustable and electrically actuated operating panel
  • Platform for machine operation and maintenance
  • Version with tropical insulation TH32
  • Electrical equipment for other mains power supplies than 400 V/50 Hz
  • Special colour schemes
GDE Error: Error retrieving file - if necessary turn off error checking (403:Forbidden)