OHA50 CNC 5

OHA 50 CNC 5 - Vertical gear shaping machine with SINUMERIK 840 D control system ensuring control of five axis, and with digital servo-drives of controlled axis is very powerful universal shaping machine intended for shaping of inner and outer gearing of face gears with straight and helical teeth.
Request

Vertical gear shaping machine OHA50 CNC5

OHA 50 CNC 5 – vertical gear shaping machine with SINUMERIK 840 D control system ensuring control of five axis, and with digital servo-drives of controlled axis is very powerful universal shaping machine intended for shaping of inner and outer gearing of face gears with straight and helical teeth. Besides control of individual axis the system ensures control of all functions of the machine, course of automatic working cycle and fault and operation diagnostics.
The machine may shape also various curved disks, geared segments, and with special accessory also racks to length of 1000 mm. Up to 20 cuts may be selected for each shaping. Optimal cutting conditions may be selected for each cutting. Other machine versions enable the enlarged properties of the machine. Great working extent and applications determine this machine especially for piece and small lot production. The gear shaper OHA 50 CNC 5 with its conception and advantageous design fulfils the requirements of modern industry due to power, accuracy and machined surface quality.

New Elements and Machine Features

  • Hydrostatic bearing of ram spindle
  • In cutting process during the return ram spindle motion
  • The tool is retracted in radial direction or in oblique direction
  • Choice of cutting Parameters for each cut
  • The possibility of Step swivel of tool
  • Back up of working programs
  • Counting of performed working cycles
  • Stop of ram spindle in dead upper position
  • Breaking of run-out of ram spindle
  • Positioning of tool and also workpiece
  • Error diagnostics
  • Safety guarding of machine
  • Lighting of working area
  • Centering of tool tooth into pre-cut workpiece tooth
  • Degresivess infeed into cut

Execution of standard grinder:

  • CNC control system Siemens Sinumerik 840 D, AC-digital drives Siemens
  • Machine control panel OP 010
  • Slimline operator panel with 10,4” (26,4 cm) TFT graphic colour flat monitor
  • Remote diagnostic for SIEMENS Sinumerik (SW +HW)
  • Keyboard-and-mouse USB connector or USB on drive

Standard SW (English) for following operation:

  • External and internal teeth of spur gears with straight and helical teeth
  • Various camgear segments
  • Version for infinitely corrected teething
  • Separately graduation
  • Variation in sense of rotation tools
  • Automatic centering

Warning: Invalid argument supplied for foreach() in /data/1/8/1843503e-8530-4c63-aea5-fd8894436569/strojimport.com/web/wp-content/themes/strojimport/single.php on line 98