SN 500 SA

Universal centre lathe SN 500 SA is for piece and small-lot production suitable for maintenance and repair divisions as well. SN 500 SA can be optionally produced in an execution with increased spindle bore of 105 mm.
Request

Small-lot production lathe

Universal centre lathe SN 500 SA is for piece and small-lot production suitable for maintenance and repair divisions as well. SN 500 SA can be optionally produced in an execution with increased spindle bore of 105 mm.

Most important features:

  • High productivity in mid-size workpiece turning
  • Hand scraping of important parts – high precision during machining
  • Easy maintenance
  • Long lifetime
  • Low operating costs
  • Easy and ergonomic control
  • High turning precision
  • Various versions with wide range of optional accessories
  • Reversing lever for apron direction movement during thread cutting -more comfortable thread cutting

Basic executions:

  • Metric execution
  • Spindle nose Bayonet B8 (DIN 55027 & ISO 702-III)
  • Spindle bore Ø 77 mm
  • Four way tool post
  • Electrics for 3 x 400 V / 50 Hz, circuit brakers
  • Right hand handwheel
  • Maximal swing in gap 700 mm in distance 230 mm from front of spindle nose
  • Rapid traverse
  • Tailstock
  • Main motor output 7.5 kW
  • Chip pan and coolant device
  • LED lighting
  • Uniflex cable carrier
  • Reversing lever for apron direction movement during thread cutting
  • Folding handle for X axis
  • Folding handle for Z axis
  • Chuck guard Ø 250 mm  with safety switch
  • CE execuion: with front chip guard, rear guard, lead screw and draw bar guard
  • Colour – RAL 7035 / 7016 / 6153
  • Set of exchange gears for cutting of threads
  • 3 pcs of shear pin
  • Operator kit
  • Operator manual on CD, documentation
  • Dead center Morse 5
  • Reduction sleeve from Metric 90 to Morse 5

Special executions:

  • Inch execution
  • Inch execution USA/Canada
  • Camlock spindle nose D8 (DIN 55029 & ISO 702-II), reduction spindle sleeve from Metric 90 to  Morse 5
  • Spindle bore Ø 105 mm Bayonet B11 (DIN 55027 & ISO 702-III), reduction spindle sleeve from Metric 115 to Morse 5
  • Spindle bore Ø 105 mm Camlock D11 (DIN 55029 & ISO 702-II), reduction spindle sleeve from Metric 115 to Morse 5
  • Voltage 3x 415V/50Hz, 3x 230V/50Hz, 3x 220V/60Hz, 3x 440V/60Hz
  • Voltage USA/Canada 3x 575V/60Hz, 3x 440V/60Hz , 3x 220V/60Hz
  • Quick change turret Multi Suisse C + toolholder CD 32150
  • Safety switch for front chip guard
  • Other colour execution than 7035 / 7016 / 6153

Warning: Invalid argument supplied for foreach() in /data/1/8/1843503e-8530-4c63-aea5-fd8894436569/strojimport.com/web/wp-content/themes/strojimport/single.php on line 98