Category
1
Lathes
1.1
Universal center lathes
1.2
CNC lathes
1.3
Vertical turning lathes
1.4
Turning-milling centres
2
Horizontal boring and milling machines
2.1
Table type
2.2
Floor type
3
Milling machines
3.1
Toolroom machines
3.2
Knee - type machines
3.3
Bed and gantry type
3.4
Graphite milling machines
4
Grinding machines
4.1
Cylindrical grinding machines
4.2
Surface grinding machines
5
Drilling machines
5.1
Bench drilling machines
5.2
Radial drilling machines
6
Machining centres
6.1
Vertical machining centres
6.2
Vertical machining centres 3 axes
6.3
Vertical machining centres 5 axes
6.4
Horizontal machining centres
6.5
Horizontal machining centres 5axes
7
Gear cutting machines
7.1
Gear hobbing machines
7.2
Gear shaping machines
8
Press machines
8.1
Universal press
8.2
Eccentric press
8.3
Press brakes
8.4
Forging presses
9
Special machines
9.1
Equipment for scrab cutting
10
Special technologies
10.1
Cold roll heardening machine

MCH 800

MCH 800
MCH 800i - is horizontal machining centre utilizable for the whole range of technologies from the power-up to the high-speed machining.
Request

Horizontal milling machining centre MCH 800i

MCH 800i – is horizontal milling machining centre utilizable for the whole range of technologies from the power-up to the high-speed machining.
The machine conception includes the T-shape bed with slidable column (X-axis) along which moves the spindle head in the vertical direction (Y-axis). The movement in the Z-axis is carried out by the rotary table (B-axis) with a workpiece.

  • outstanding characteristic of damping and absorbtion of mechanical vibrations
  • maximum rigidity and maximum value of natural frequencies of movable parts
  • machine dynamical and thermal stability necessary for the modern progressive technology of machining
  • machine modern design – linear guideways in all axes and ecological grease lubrication of guideways and ball screws

Machine base features:

  • CNC control, Siemens 840 D or Heidenhain iTNC 530
  • spindle speed 8000 RPM
  • motors Siemens
  • two step planetary gearbox , cogged belt
  • taper 50
  • continuous B axis with direct feedback
  • tool magazine for 56 tool
  • linear scales at  X, Y, Z axis
  • worm geared B axis
  • direct feedback – encoder – at B axis
  • direct feedback X,Y,Z
  • linear guide ways NSK Japan
  • tool blow off
  • coolant tank with chip conveyor
  • 2 auger style chip conveyors
  • automatic tool changer
  • hydraulic unit
  • pneumatic unit
  • electronic  thermal compensation guarantee that all the asked  accuracies at Table 2 comply
  • workspace splashing system
  • end of work cycle  light
  • anchoring system

Automated  manufacturing

On machining centers the iTNC 530 manages tools and pallets. Over the data interfaces you can even interrogate operating conditions or operate the machine  remotely.

Five-axis machining with swivel head and rotary table

  • When you are programming away from the machine, the iTNC 530 automatically takes the machine geometry into account
  • Tilting of the working plane
  • Cylinder-surface machining TCPM (Tool Center Point Management)
  • 3-D tool compensation
  • Fast execution through short block processing time

Does this model not meet your needs? We also have smaller or bigger option.

The manufacturer reserves the right to change the product parameters and design without prior notice.

Strojimport