Category
1
Lathes
1.1
Universal center lathes
1.2
CNC lathes
1.3
Vertical turning lathes
1.4
Turning-milling centres
2
Horizontal boring and milling machines
2.1
Table type
2.2
Floor type
3
Milling machines
3.1
Toolroom machines
3.2
Knee - type machines
3.3
Bed and gantry type
3.4
Graphite milling machines
4
Grinding machines
4.1
Cylindrical grinding machines
4.2
Surface grinding machines
5
Drilling machines
5.1
Bench drilling machines
5.2
Radial drilling machines
6
Machining centres
6.1
Vertical machining centres
6.2
Vertical machining centres 3 axes
6.3
Vertical machining centres 5 axes
6.4
Horizontal machining centres
6.5
Horizontal machining centres 5axes
7
Gear cutting machines
7.1
Gear hobbing machines
7.2
Gear shaping machines
8
Press machines
8.1
Universal press
8.2
Eccentric press
8.3
Press brakes
8.4
Forging presses
9
Special machines
9.1
Equipment for scrab cutting
10
Special technologies

MANURHIN K´MX413

MANURHIN K´MX413
MANURHIN K’MX 413 - THE MANURHIN K’MX 413 is dedicated to run small parts from Ø 3 (2)–16 mm (over Ø 13 mm, preparation of bars is necessary in standard, as an option it can be used with full Ø 16mm bars without preparation).
Request

Swiss-type Headstock Machines MANURHIN K’MX 413

MANURHIN K’MX 413 – is dedicated to run small parts from Ø 3 (2)–16 mm (over Ø 13 mm, preparation of bars is necessary in standard, as an option it can be used with full Ø 16mm bars without preparation).
Counter spindle, powered tools are included in the basicmachine as well as the barloader. With 2 electrospindles, 3 powered tools, C-axis, and up to 12 fixed tools, the K’MX 413 is also able to run complex parts. With this machine, we want to offer an economical, reliable and easy solution. Four linear axes (X1, Y1, Z1, Z2), two rotary axes (C1, C2).

  • Max bar ⌀ 13mm or ⌀16 mm
  • 12.000 rpm on both spindles
  • Strong spindle motor
  • Two axial tools in cut at the same time
  • Number of tools in cut: 2 axial

Strojimport